Looking for your next DIY project? Perhaps you need some inspiration on how to make your house a home? Our growing library of how-to's, DIY tutorials, and home improvement articles are here to guide you through your DIY adventures.
Interior Design & Decor
The color-blocking trend, once mainly associated with fashion, is spilling over into living spaces everywhere. Colour-blocking combines bold, bright colors and clean, crisp lines to create accent walls that look and feel like modern art. It takes only a few materials to create, can be finished in one day, and the creative possibilities are as endless as your imagination! Here is a step-by-step guide to take your color-blocked wall from idea to reality.
You will need at least one color to do this project: the paint that you want for your main accent color. Don’t be afraid to be bold! This color is meant to contrast and draw attention.
If your walls are already a neutral color that you’re happy with, the accent color is the only paint you’ll need. If the existing paint on the wall is dark or already a bold color, you may want to cover the wall with a lighter neutral base layer first. color-blocking works best when a bold color contrasts with a neutral color, so white or something similar is preferable for this base layer.
Not even the most steady hand can create the sharp lines you’re going to need on your wall. A high-quality painter’s tape will be crucial to your success.
Paint Brushes and Rollers
Grab some rollers for quick and even painting in the big areas, and a few brushes to cut around the ceiling, trim, corners, and anywhere your roller can’t reach.
You’ll want to apply your tape along the line of a laser level to ensure it’s as straight as it can be. A level that stays on the wall or sits on a tripod and shines the light onto the wall is ideal.
Paint your base layer.
This step is optional: You may choose to keep the existing shade and paint over it. The base layer is what your colored paint will be contrasted with. Follow the instructions on the paint label for the proper number of coats and drying time. Keep in mind that this layer may not necessarily need to cover the entire wall. You will only need to paint a little bit past your tape line. Everything else will be covered with your colored paint.
Decide where your lines will go.
This is where you will put your laser level to use. Your line can be horizontal, vertical, diagonal, or a combination of directions. The important thing is that the laser level will give you a straight and level line to follow. Your line should partly overlap your base layer. This will ensure that after the tape is peeled, your wall will have a sharp line without any gaps.
Place your painter’s tape.
Once you’ve set your line with the level, it’s just a matter of placing your tape on the wall following the line you’ve created. Where you’ll be painting your accent color will dictate how you place the tape on the wall. For example, if you are painting your color from the bottom of the wall up to a horizontal line, the bottom of the tape should be touching your laser level line. If you are painting from the ceiling down, the top of your tape should be touching the line. If you created your line and placed your tape correctly, you will see a bit of your base layer on the side of the tape that will be painted. This will be covered with color.
Get your brushes and rollers ready and get your new bold color on the wall! Paint your color all the way to and on top of the tape. Painting on top of the tape will ensure that there are no gaps between your color and the base layer. Take it slow when you are painting on top of the tape so the opposite color remains clean and neutral. Leave painting around the tape line until the end. This will help you in your next step.
Peel the tape.
For the cleanest lines, it’s recommended that you peel the tape off when the paint is still wet. This is why it’s a good idea to do the painting around the tape last. Pull the tape off slowly at a 45-degree angle to prevent the tape from tearing. It’s easily fixable but can slow you down in the final moments.
Enjoy your new wall!
After the tape has been peeled, you can stand back and admire how the bold colors and straight lines enhance the features of the wall and the entire space around it. Maybe you want to make your new wall a focal point for a piece of furniture or art, or even the focal point itself. However you use and enjoy your wall is up to you. Like the project itself, the only limit is your imagination!
Disclaimer: The information and resources in these articles and on this website are available for informational and educational purposes only. The articles provided on this website are created with every reasonable effort to ensure completeness and accuracy. In doing so, the article writers, publishers, and the business that this website represents assume no responsibility for errors, omissions, or opposed interpretation of the articles and under no circumstance will these parties be held liable for any direct, indirect and/or consequential damages of any kind incurred from undertaking tasks outlined in the articles or on this website. In addition, it is suggested that readers check by-laws, zoning laws and building codes of your local area and country.
Shop-O-Rama - Draffenville
(includes Clothing Boutique)
Shop-O-Rama - Calvert City
© 2019-2023 All Rights Reserved. Donohoo Enterprises, Inc.: Two SHOP-O-RAMA locations to serve you in Draffenville & Calvert City