Helpful How-To's & DIY Tutorials

Looking for your next DIY project? Perhaps you need some inspiration on how to make your house a home? Our growing library of how-to's, DIY tutorials, and home improvement articles are here to guide you through your DIY adventures.

Home Maintenance

Preparing Your Eavestroughs for Winter

Preparing Your Eavestroughs for Winter

Once fall arrives, we start to prepare for the stormy, rainy, snowy winter months ahead. Although not the most exciting task, a top priority should be gutter cleaning and repair. Clogged and sagging gutters not only look bad, but can also cause damage that could have been prevented.

Shop-O-Rama has prepared some useful tips for prepping your eavestroughs for winter.

Tip #1: Clean out the leaves and debris

Over the winter, snow and ice will accumulate in your gutters. In the spring, if they are still clogged from leaves and other debris, water will have a tough time flowing through your eavestroughs and downspouts, away from your home. Eventually the clogged gutter can turn into detached, split or cracked gutters and, even worse, water damage to your home’s walls and foundation.

The simple task of cleaning out all the leaves and debris that accumulate in the fall will pay off in the long run. Pay close attention to the corners and junctions where gutters meet – this is where leaves often get stuck.

Tip #2: Inspect your eavestroughs for wear and tear

While cleaning your gutters, inspect them. Look for cracks or holes. If you find any, make sure you seal or repair the damage. Pay particular attention to joints – the spot where gutters meet. Confirm that all fasteners are in place, since a missing fastener could cause a gutter to blow off the roof and potentially damage your home.

Tip #3: Straighten your gutters

Over time, gutters can warp or shift. To help water flow smoothly and quickly, make sure you realign them so water can’t pool in any one spot.

Tip #4: Seal leaking end caps

Even if your home has seamless gutters, there’s going to come a time when the end caps will leak, which may eventually damage your home. To prevent damage, you’ll need to seal the leaking end caps. The easiest way is to scour off the oxidation around the seam and end cap with coarse steel wool or a rigid scrub brush, then rinse with water and let dry. Once dry, apply a sealer around the seams and end cap and work it in using a finger (it’s best to wear gloves).

Tip #5: Install gutter guards

Installing a gutter protection system is a great way to keep leaves and debris out of your gutters, but it’s not foolproof. Talk to your local hardware store experts about what systems work best and allow easy access for annual cleaning.

Tip #6: Extend your downspout

The downspout is where water (from melted snow and rain) is whisked away from your home. By extending the length of your downspout, water is diverted away from your home and prevents damage to your foundation.

Typically, downspouts should terminate at least three to five feet away from your home’s foundation.

Tip #7: Check for structural damage on and near your roof

Your eavestroughs are only one part of your roof system designed to keep the elements out of your home. To work effectively, each part of the system has to be in good working condition. While you’re cleaning your gutters, examine all the other components, such as the fascia, siding, roof and foundation. Look for staining, rotting and damage. If you locate any of these issues, and suspect water damage has already occurred, locate the source of the water and repair it immediately.

In one weekend, you can accomplish virtually all the tasks that will prepare your eavestroughs for the winter months and prevent future, potentially expensive damage to your home.

For supplies and expert assistance, stop by Shop-O-Rama – we will be happy to help!

Disclaimer: The information and resources in these articles and on this website are available for informational and educational purposes only. The articles provided on this website are created with every reasonable effort to ensure completeness and accuracy. In doing so, the article writers, publishers, and the business that this website represents assume no responsibility for errors, omissions, or opposed interpretation of the articles and under no circumstance will these parties be held liable for any direct, indirect and/or consequential damages of any kind incurred from undertaking tasks outlined in the articles or on this website. In addition, it is suggested that readers check by-laws, zoning laws and building codes of your local area and country.